Sale of a "demo" machine
As basis, a RC Machines lathe ref RC6125Ax750-4 was used
The lathe has been completely reworked, as we had no interest to keep a traditional use, all manual controls were removed.
The machine is sold in working order.
Disassemble, re-assemble and transport are to be born by the buyer, under his responsability.
1 / Mechanics :
Dismantling of the lead screw, removing the feed box, dismantling the saddle, etc.
Machining of support plates for motors, nut supports
Machining of ballscrews
Adjustment and installation of the new mechanics
2 / Electronics
Mounting in a wall box
Cabling Two Leadshine style drivers and power supply
Mounting an emergency stop button
Mounting a power switch
Mounting a relay to the pin
Mounting an inverter for the spindle
Mounting a suction pump and a control relay
Spindle encoder for thread
Technical characteristics :
Distance between centers: 750 mm
Center height: 125 mm
Tool height: 12 mm max
Turret: 4 tools
max. above the bed: 250 mm
max. above carriage: 150 mm
Longitudinal feed: 0.1 / 0.2 mm
Spindle bore: 20 mm
Spindle taper: CM3
morse taper-tip against: CM2
Quill stroke of the doll: 65 mm
Spindle speed: 2000 rpm max / min.
Engine: 400 V / 550 W
Net weight: 130 kg
Dimensions: 1450 x 550 x 450 mm
Weight: 180.00 kg
Seller assumes all responsibility for this description. Auctelia does not act as representative for this sale.
List of items