Press press (press)
Brand: Carlo salvi
Completely refurbished in 2004 (by Carlo Salvi) for research purposes.
No work needed, very little demand in time (a few hundred hours of operation).
Composed of a matrix and 2 punches (blank + finisher).
Cadences: 360 pieces per minute on carbon steel.
This machine usually hits Ø5.25mm (previously skin-passed) but it can potentially hit Ø3 to 6.35mm wires by adapting the tooling.
The cutoff is 87mm.
Its limits are a maximum cutting force (of lopin) of 2 200daN and a maximum strike force of 17 000daN.
The lot includes:
• The typing machine
• The box built to measure
• The power supply cabinet
• A monitoring system "SK4c from Schwer and Kopka"
Technical data :
Max diameter of the wire: 3-6,35 mm
Max length of the rod: 80 mm
Max length of the billet: 97 mm
Maximum diameter of the head: 16 mm
Max speed: 360 pieces per minute
Max cutting force: 2,200 daN
Max Strike Pressure: 17,000 daN
Weight of the amchine: 6,900 daN
Ejection stroke on punches: 9.5 mm (if mounted)
Maximum force of the ejection on the punches: 700 daN (if mounted)
Supply voltage: 380 V 50 Hz
Installed power: 58 kW
Air pressure: 6 bar
Maximum air consumption: 200 NL / min
Suction: 1000 m³ / h (pipe diameter 200 mm)
Dimensions: 3540 x 3870 x 1900 mm (see photo)
- Power supply cabinet
- Cowling (the machine is inside but the soundproofing box is made to measure, and can be opened on each side face)
- schwer + kopka acquisition system.
- Some punches
- Spot lighting.
See original description
List of items
Automatic and non-contractual translation. Auctelia does not act as representative for this sale.